LD Systems DPA260

The LD DPA 260 is a 6-channel 19” speaker processor for our VA4 and VA8.

• Product type Signal Processors
• Weight 3,5 kg
• Height 44.5 mm
• Width 482 mm
• Depth 225 mm
• Frequency response 20 - 20.000 Hz
• Type 6-channel
• Controls Edit Input 1 - 2, Edit Output 1 - 6, Enter, Escape, NAV / PAR 1, PAR 2, PAR 3, Utility
• Operating voltage 90 V AC - 250 V AC, 50 - 60 Hz
• Indicators 2 x 6-segment input level display, 2 x input clip, 2 x input edit LED, 2 x input mute LED, 6 x 5-segment output level display, 6 x output clip, 6 x output edit LED, 6 x output limit, 6 x output mute LED, multifunction LC display
• THD < 0.005 %
• Max. input level +20 dBu (balanced) dBu
• Signal-to-noise ratio > 106 dB
• Dynamic range 111 (A-weighted) dB
• Input impedance (kOhms) 27 kOhm
• Max. output level +20 dBu (balanced) dBu
• Output impedance 120 Ohm(s)
• Mains connector IEC socket
• Line input connectors 1 x stereo digital (SPDIF coax), 2 x XLR (bal.)
• Line outputs 6
• Crosstalk 107 (+ 20 dBu @ 1 kHz) dB
• Line output connectors XLR (balanced)
• Line inputs 3
• Interfaces RS485 (in andout), USB
• AD/DA converter 24 bit
• Sampling frequency 48 kHz
• Filter type Bessel, Butterworth, Linkwitz-Riley
• Delay max. 848.99 mS
• Filter slew rate 12 dB/oct, 18 dB/oct, 24 dB/oct, 6 dB/oct